The “Monobloc” brake kit provides improved performance through reduced unsprung weight using hard anodised aluminium front rotor hats. Like the performance kit the rotors are larger in diameter and significantly thicker in cross section compared to the OE rotor dimensions.

The latest production technology has been used on the 2 piece calipers to significantly reduce brake fade under most driving conditions. The front brake load ratio has been engineered into the production of these rotors to maintain the standard brake balance of the vehicle, offering improved brake feel and driving confidence

The “Monobloc” caliper construction with hardened and ground stainless steel pistons minimise heat transfer from pads to fluid.

Package Includes

• 2 x 355x32mm 2-peice 12-slots Front disc rotors
• 2 x Front Caliper mounts
• 1 x Set of bolts, washers and mounting hardware.
• 2 x 4 Piston “Monobloc” front Caliper (red)
• 2 x Set of front brake pads
• 1 x Labour

Notes

Minimum 17″ Wheel Size required.

This package  is for all VE 3.6lt V6 up to 06/2008 and gives your single outlet exhaust VE Omega, Lumina or Belina 3.6lt V6  extra performance,  improved economy with looks and sound to match with this special HPF VE V6 Power pack.

Keep Reading

The new 2011 Cruze sports variants are powered by a new 1.4-litre intelligent turbo induction (1.4 iTi) engine, which produces 103kW of power and 200Nm of torque which is actually less power(1kw) than the entry-level CD and CDX…

Keep Reading

Pedders SportsRyder Supercar Adjustable Coilover Kit offers eXtreme ride control for the hardcore enthusiast. SportsRyder Supercar Coilover kits are the most advanced solution for your Ford. The separate bump and rebound adjustment allows the driver to dial in the “setup” of the cars handling balance just like the race teams do. Add to that full height adjustment from the base mounts that maintains bump and droop travel on all four corners and you have a premium suspension system, tuneable to individual needs.

These are the ultimate street performance suspension kits for late model Ford and Holden sedans.

Pedders Sports Ryder sway bars (or anti-roll bar) connect the left and right wheels together through short lever arms linked by a high quality torsion spring. A Pedders sway bar increases the suspension’s roll stiffness—its resistance to roll in turns, independent of its spring rate in the vertical direction. This delivers the following benefits:
• Reduction of body roll during cornering thus providing more stable ride and handling.
• Tunes the understeer & oversteer characteristics of the vehicle. This enhances the cars performance characteristics whilst reducing unwanted camber change that adversely affects tyre wear.

Package Includes

• 1 x Pair Pedders Extreme SuperCar adjustable coil-over kit – (Front)
• 1 x Pair Pedders Extreme SuperCar adjustable coil-over kit – (Rear)
• 1 x Centre Diff bush
• 1 x HD 27mm front anti-sway bar
• 1 x HD 22mm rear anti-sway bar
• 1 x Control arm bush kit – lower inner Front
• 1 x Camber/Caster kit – Upper inner Front
• 1 x Camber/Caster kit – Upper inner Rear
• 1 x Four wheel alignment
• 1 x Labour to install

Pedders SportsRyder Supercar Adjustable Coilover Kit offers eXtreme ride control for the hardcore enthusiast. SportsRyder Supercar Coilover kits are the most advanced solution for your Holden VE Commodore. The separate bump and rebound adjustment allows the driver to dial in the “setup” of the cars handling balance just like the race teams do. Add to that full height adjustment from the base mounts that maintains bump and droop travel on all four corners and you have a premium suspension system, tuneable to individual needs.

These are the ultimate street performance suspension kits for late model Ford and Holden sedans.

Pedders Sports Ryder sway bars (or anti-roll bar) connect the left and right wheels together through short lever arms linked by a high quality torsion spring. A Pedders sway bar increases the suspension’s roll stiffness—its resistance to roll in turns, independent of its spring rate in the vertical direction. This delivers the following benefits:
• Reduction of body roll during cornering thus providing more stable ride and handling.
• Tunes the understeer & oversteer characteristics of the vehicle. This enhances the cars performance characteristics whilst reducing unwanted camber change that adversely affects tyre wear.

Package Includes

• 1 x Pair Pedders Extreme SuperCar adjustable coil-over kit – (Front)
• 1 x Pair Pedders Extreme SuperCar adjustable coil-over kit – (Rear)
• 1 x Rear K-frame mount kit
• 1 x Set Caster lock washers
• 1 x Rear adjustable toe link arms
• 1 x Toe link Inner lockwashers
• 1 x Toe link inner bush kit
• 1 x Front strut top mount – Off set
• 1 x Bush – Front Control arm lower inner (Rear bush)
• 1 x Bush – Front Control arm lower inner (Front bush)
• 1 x HD 26mm front sway bar
• 1 x HD 22mm rear anti-sway bar
• 1 x Four wheel alignment
• 1 x Labour to install

Pedders SportsRyder Supercar Adjustable Coilover Kit offers eXtreme ride control for the hardcore enthusiast. SportsRyder Supercar Coilover kits are the most advanced solution for your Holden VT to VZ Commodore. The separate bump and rebound adjustment allows the driver to dial in the “setup” of the cars handling balance just like the race teams do. Add to that full height adjustment from the base mounts that maintains bump and droop travel on all four corners and you have a premium suspension system, tuneable to individual needs.

These are the ultimate street performance suspension kits for late model Ford and Holden sedans.

Pedders Sports Ryder sway bars (or anti-roll bar) connect the left and right wheels together through short lever arms linked by a high quality torsion spring. A Pedders sway bar increases the suspension’s roll stiffness—its resistance to roll in turns, independent of its spring rate in the vertical direction. This delivers the following benefits:
• Reduction of body roll during cornering thus providing more stable ride and handling.
• Tunes the understeer & oversteer characteristics of the vehicle. This enhances the cars performance characteristics whilst reducing unwanted camber change that adversely affects tyre wear.

Package Includes

• 1 x Pair Pedders Extreme SuperCar adjustable coil-over kit – (Front)
• 1 x Pair Pedders Extreme SuperCar adjustable shock absorber & spring kit – (Rear)
• 1 x HD 27mm front anti-sway bar
• 1 x HD 22mm rear anti-sway bar
• 1 x Front adjustable Caster bush kit
• 1 x Four wheel alignment
• 1 x Labour to install

The “Monobloc” brake kit provides improved performance through reduced unsprung weight using hard anodised aluminium front rotor hats. Like the performance kit the rotors are larger in diameter and significantly thicker in cross section compared to the OE rotor dimensions.

The latest production technology has been used on the 2 piece calipers to significantly reduce brake fade under most driving conditions. The front & rear brake load ratio has been engineered into the production of these rotors to maintain the standard brake balance of the vehicle, offering improved brake feel and driving confidence

The “Monobloc” caliper construction with hardened and ground stainless steel pistons minimise heat transfer from pads to fluid.

Package Includes

• 2 x 355x32mm 2-peice 12-slots Front disc rotors
• 2 x 355x28mm 2-peice 12-slots Rear disc rotors
• 2 x Front Caliper mounts
• 2 x Rear Caliper mounts
• 1 x Set of bolts, washers and mounting hardware.
• 2 x 4 Piston “Monobloc” front Caliper (red)
• 2 x 4 Piston “Monobloc” rear Caliper (red)
• 2 x Set of front & rear brake pads
• 1 x Labour

Notes

Minimum 17″ Wheel Size required.

Look no further than our Ultimate kit to satisfy the demands of serious enthusiasts of street & and track vehicles. Our 2 piece rotor and caliper design pushes the boundaries of extreme braking to achieve world class performance with 100 km/h – 0 stopping distances less than 35m.

The Ultimate kit exceeds the V8 Supercar specifications in several parameters of overall braking capacity and maintains perfect braking balance under all braking conditions.

Package Includes

• 2 x 381x32mm, 2-piece, 24-slot front disc rotors
• 2 x 356x28mm, 2-piece, 24-slot rear disc rotors
• 2 x Front Caliper mounts
• 2 x Rear Caliper mounts
• 1 x Set of bolts, washers and mounting hardware.
• 2 x 6 Piston front Caliper (painted)
• 2 x 4 Piston rear Caliper (painted)
• 2 x Set of front & rear brake pads
• 1 x Labour

Options

Calipers available in red, yellow, black & silver.

Notes

Min 19″ wheel size required (excl HBD Veloce & Blaze Wheels)

Look no further than our Ultimate kit to satisfy the demands of serious enthusiasts of street & and track vehicles. Our 2 piece rotor and caliper design pushes the boundaries of extreme braking to achieve world class performance with 100 km/h – 0 stopping distances less than 35m.

The Ultimate kit exceeds the V8 Supercar specifications in several parameters of overall braking capacity and maintains perfect braking balance under all braking conditions.

Package Includes

• 2 x 381x32mm, 2-piece, 24-slot front disc rotors
• 2 x 356x28mm, 2-piece, 24-slot rear disc rotors
• 2 x Front Caliper mounts
• 2 x Rear Caliper mounts
• 1 x Set of bolts, washers and mounting hardware.
• 2 x 6 Piston front Caliper (painted)
• 2 x 4 Piston rear Caliper (painted)
• 2 x Set of front & rear brake pads
• 1 x Labour

Options

Calipers available in red, yellow, black & silver.

Notes

Min 19″ wheel size required (excl HBD Veloce & Blaze Wheels)

The Performance kit provides great value for money performance over the original equipment brake package. The rotors are larger in diameter and significantly thicker in cross section compared to the OE rotor dimensions.

The latest production technology has been used on the 2 piece calipers to significantly reduce brake fade under most driving conditions. The front & rear brake load ratio has been engineered into the production of these rotors to maintain the standard brake balance of the vehicle, offering improved brake feel and driving confidence

The “Performance” kit provides the most economical platform for on road confidence, improved brake feel and most importantly, vehicle and passenger safety. Designed, tested and certified to conform to Australian Design Rule ADR31/01.

Package Includes

• 2 x 343x32mm 12-slot Front disc rotors
• 2 x 343x28mm 12-slot Rear disc rotors
• 2 x Front Caliper mounts
• 2 x Rear Caliper mounts
• 1 x Set of bolts, washers and mounting hardware.
• 2 x 4 Piston front Caliper (red)
• 2 x 4 Piston rear Caliper (red)
• 2 x Set of front & rear brake pads
• 1 x Labour

Options

Upgrade to “Monster” Upgrade with 2 piece disc rotors for addition $1,000. See images below.

Notes

Minimum 17″ Wheel Size required.