HPF STAGE 1 | 350KW

From $3,995.00
Product Code: #CAMARO SS2 | HPF STAGE 1 | 350kW
Install Time: 1 Day
Model Compatibility: Camaro 2SS GenV LT1 6.2L
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
339kW
455hp
350kW
469hp
+11kW
+15hp
TORQUE
619Nm
457ft-lb
630Nm
465ft-lb
+11Nm
8ft-lb
POWER
STANDARD 339 KW
455 hp
DYNO CHIPTUNING 350 KW
469 hp
DIFFERENCE +11 KW
15 hp
TORQUE
619 Nm
457 ft-lb
630 Nm
465 ft-lb
+11 Nm
8 ft-lb

CAMARO 2SS GENV LT1 6.2L | HPF STAGE 1 | 350KW

The HP-F Stage 1 Performance Package for the Chevrolet Camaro SS 6.2L has been developed to unlock additional performance, sharper throttle response and an even more engaging driving experience from the powerful LT1 V8.

Every upgrade begins with a pre-upgrade dyno assessment, allowing us to establish baseline power and torque figures before any modifications are carried out. This provides a clear benchmark and enables us to accurately measure the gains achieved through the upgrade.

At the heart of the package is a high-flow cold air intake system, designed to improve airflow into the engine and reduce intake restriction. By allowing the LT1 engine to breathe more efficiently, the intake upgrade provides the foundation for increased performance throughout the rev range.

To maximise the benefits of the intake upgrade, HP-F performs a custom ECU calibration developed specifically for your vehicle. Using extensive dyno testing and data analysis, our experienced tuning team optimises ignition timing, fuel delivery and throttle response to deliver safe, reliable and repeatable performance gains.

The result is a Camaro that feels more responsive, accelerates harder and delivers stronger power throughout the entire rev range, while maintaining excellent drivability for everyday use.

Once tuning is complete, every vehicle undergoes comprehensive road and dyno testing to verify performance, reliability and overall drivability. A final dyno run is then performed to compare against the original baseline figures and demonstrate the improvements achieved through the Stage 1 package.

At the completion of the upgrade, you'll receive a detailed dyno report highlighting the power and torque gains achieved. The result is a Camaro SS that delivers improved performance, sharper throttle response and a more rewarding driving experience while retaining the reliability expected from a professionally engineered HP-F upgrade.

Unlock the potential of your Camaro SS with HP-F's dyno-tested Stage 1 Performance Package.

Package Includes

1 x Before Dyno run
1 x Roto-Fab Big-Gulp Performance Cold air intake
1 x Custom ECU- reprogram
1 x All labour to fit/tune/test

Key Features

Modest power gains, optimisation of the tune to suit 98 octane fuel, with zero down sides.

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here