Stage 4 | 660KW

From $45,385.00
Product Code: #STAGE 4 Kit | Mustang FO
Install Time: Approx 6-7 Days
Model Compatibility: Mustang GT 5.0L FO (2024-26)
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
345kW
463hp
660kW
885hp
+315kW
+422hp
TORQUE
550Nm
406ft-lb
910Nm
671ft-lb
+360Nm
266ft-lb
POWER
STANDARD 345 KW
463 hp
DYNO CHIPTUNING 660 KW
885 hp
DIFFERENCE +315 KW
422 hp
TORQUE
550 Nm
406 ft-lb
910 Nm
671 ft-lb
+360 Nm
266 ft-lb

Mustang GT Stage 4 | 660KW

The HP-F Stage 4 Performance Package has been developed for Mustang GT owners seeking exceptional supercharged performance without compromising reliability or drivability. Built around the renowned Whipple Gen 6 3.0L Intercooled Supercharger System, this package combines increased airflow, enhanced engine durability and a complete performance exhaust upgrade to deliver outstanding horsepower, immense torque and an exhilarating driving experience.

Every upgrade begins with a comprehensive pre-upgrade dyno assessment, establishing baseline power and torque figures before any modifications are carried out. This provides an accurate benchmark and allows us to clearly demonstrate the gains achieved throughout the upgrade process.

At the heart of the package is the Whipple Gen 6 3.0L Intercooled Supercharger System, engineered to deliver substantial boost pressure and exceptional airflow throughout the rev range. Featuring high-efficiency twin-screw technology and integrated intercooling, the Whipple system provides instant throttle response, massive mid-range torque and relentless acceleration that transforms the character of the Mustang GT.

Supporting the supercharger upgrade is a Whipple Dual Open Airbox System, designed to maximise airflow into the supercharger and minimise intake restriction. This allows the Coyote V8 to breathe more efficiently while ensuring the supercharger can operate at its full potential.

To further enhance performance, Stage 4 incorporates a complete performance exhaust package featuring 1-7/8" ceramic-coated long-tube headers, high-flow catalytic converters and a dual 3-inch stainless steel cat-back exhaust with bi-modal valves. This significantly improves exhaust flow, reduces back pressure and helps the engine produce greater power while delivering an aggressive V8 soundtrack on demand.

Recognising the increased demands placed on the engine under boost, the package includes Boundary billet oil pump gears and a billet lower crank gear. These proven reliability upgrades strengthen critical engine components and provide additional confidence when operating at higher power levels.

As part of the installation process, the vehicle receives a complete engine oil and filter service, ensuring optimal protection and reliability following the upgrade.

To unlock the full potential of the hardware package, HP-F performs a bespoke custom ECU dyno calibration developed specifically for your vehicle. Extensive dyno testing is utilised to optimise fuel delivery, ignition timing, airflow modelling, throttle response and boost management, ensuring safe, reliable and repeatable performance gains.

Once tuning is complete, every vehicle undergoes comprehensive dyno validation and road testing to verify performance, drivability and reliability. A final dyno run is then conducted to compare against the original baseline figures, clearly demonstrating the substantial gains achieved through the Stage 4 package.

At the completion of the upgrade, you'll receive a detailed before-and-after dyno report showcasing the final power and torque improvements. The result is a Mustang GT that delivers explosive acceleration, immense torque and genuine supercar-level performance while retaining the drivability expected from a professionally engineered HP-F package.

Experience the ultimate Whipple-powered Mustang GT with HP-F's Stage 4 Performance Package, combining proven reliability upgrades, exceptional power and dyno-tested performance.

Package Includes

1 x Whipple 3.0L Gen6 Intercooled supercharger stage 2 kit
1 x Whipple Dual Open Airbox kit inc Filters 
1 x Hurricane 1-7/8" 4-1 headers coated & High Flow Cats
1 x Hurricane dual 3" S/Steel Catback with Bi-Modal Valves
1 x Boundary Billet oil pump gears & lower crank gear
1 x Engine Oil and Filter change  
1 x Custom ECU remapping 
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Key Features

Featuring a Whipple Gen 6 3.0L supercharger, dual open-air intake system, long-tube headers, bi-modal exhaust system, billet oil pump gears and custom dyno calibration, the HP-F Stage 4 Package delivers the ultimate combination of power, reliability and driving excitement for the modern Mustang GT.

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary based on each specific vehicle.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Quoted power figures are approximate and calculated at the flywheel, based on results with the 6.2 lt. LSA power plant at Harrop HQ dynomometer.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Final price may vary dependent on specific options chosen.
  • Some automatic transmission models may require a cooler kit at additional cost.
  • Balance of new car driveline warranty available at additional cost.
  • Images are for illustration purposes only

Enquire Here