RG240 Emissions Testing for Modified Vehicles
HPF Auto Service Centre is approved to carry out RG240 emissions testing for modified vehicles requiring emissions compliance as part of the Victorian vehicle certification process.
Using specialised emissions testing equipment and a controlled chassis dynamometer environment, we provide accurate and reliable emissions testing, along with comprehensive reporting for your VASS engineer, vehicle certifier, or relevant regulatory authority.
Whether your vehicle has undergone an engine conversion, turbo or supercharger installation, aftermarket ECU upgrade, or other significant performance modifications, our experienced team can assist you through the emissions testing and certification process.
Below, you'll find an overview of the RG240 testing procedure, why emissions testing may be required for your vehicle, and answers to some of the most frequently asked questions.
My VASS signatory has requested that my vehicle undergo RG240 emissions testing. Why is the test needed
A VASS signatory may request an RG240 test when modifications to a vehicle could affect its emissions-control systems. The test provides evidence to help the VASS signatory determine whether the modified vehicle meets the applicable emissions requirements.
What is an RG240 test
RG240 (Repair Grade 240) is a 240-second dynamic vehicle emissions test performed on a dynamometer. During testing, a multi-gas analyser is used to measure regulated exhaust gases, including carbon monoxide (CO), hydrocarbons (HC) and oxides of nitrogen (NOx).
What modifications may warrant an RG240 test
While there is no published rule stating that a specific modification could trigger the requirement for an RG240 test, the test is typically requested by a VASS signatory when a modification may have materially affected the vehicles emission system. Modifications that may warrant an RG240 test include the following:
- Supercharger installations
- Turbocharger installations
- Engine swaps
- Aftermarket engine management systems
- Internal and external engine modifications
- Significant fuel system changes
- Emission equipment relocation or alteration
- Individually constructed vehicles (ICV's)
- GVM alterations
What does an RG240 test cost
Testing starts at $1,295 Inc GST, with the final price confirmed after the booking assessment. The full $1,295 Inc GST testing fee is payable when the booking is made. Any additional approved work, repairs, tuning or retesting costs are due when the vehicle is collected. A booking may be rescheduled with at least one week’s notice, subject to availability. Payment does not guarantee a passing result.
What is the process to book in for an RG240 test at HPF
We have tried to make the booking process as straightforward as possible:
- Contact us by phone or email, or visit our sales office, to book your vehicle.
- The full $1,295 testing fee is payable when the booking is made to secure the booking date and time.
- We will record the relevant vehicle and contact details, including your email address.
- We will email you an online form to complete and return.
- To help make your booking as productive as possible, complete the checklist supplied with your booking form.
- Bring the vehicle in at the agreed date and time. Testing cannot normally be completed while you wait, so the vehicle must remain with us for the full day.
- Collect the vehicle after testing is complete and pay any additional approved costs.
- We will send the test results to your nominated VASS signatory and provide you with a copy.
I am building a kit car; do I need an RG240 test
The VASS signatory responsible for the vehicle will determine the evidence required. An RG240 test may be requested where emissions compliance cannot be demonstrated through acceptable documentation or other approved evidence.
I am importing a vehicle from overseas; do I need an RG240 test
Some imported vehicles require a VASS approval certificate and evidence of compliance with the applicable emissions standards. Depending on the vehicle and its approval pathway, acceptable evidence may include manufacturer documentation, an approved model report or emissions testing. The VASS signatory should confirm what evidence is required before a test is booked.
I want to install a late-model engine in an older car. What emissions standards will it need to meet
The Australian Design Rules (ADRs) applicable to the vehicle at the time of its manufacture must continue to be complied with following modification. VSB 14 does not generally require the vehicle to adopt the ADR requirements applicable to the donor engine or donor vehicle.
Example 1 > 2015 LSA engine installed in a 1971 HG Monaro.
ADR 26 was the first national motor vehicle emissions requirement and was introduced on 1 January 1972.
The 1971 HG Monaro is not subject to any ADR emissions requirement.
VSB 14, NCOP3 Section LA Engine, Item 3 - Australian Design Rules, paragraph 3, reads: “Generally, when an engine of different design is substituted, the gaseous emission control system of the donor vehicle, from air intake right through the engine to the exhaust outlet, should be utilised as a package.”
This conversion does not need to meet the 2015 emissions requirements of ADR 79/03 that applied to the engine’s donor vehicle.
An RG240 test is not required because the 1971 HG Monaro is not subject to an original ADR emissions requirement.
An idle carbon monoxide (CO) test is not required because the 1971 HG Monaro is not subject to an original ADR emissions requirement.
Example 2 > 2016 LS3 engine installed in a 2002 VX Holden Commodore SS.
The VX Commodore is subject to ADR 37/01, which was first introduced on 1 January 1997.
NCOP3 Section LA Engine, Item 3 - Australian Design Rules, paragraph 3, reads: “Generally, when an engine of different design is substituted, the gaseous emission control system of the donor vehicle, from air intake right through the engine to the exhaust outlet, should be utilised as a package.”
Certification will normally require evidence that the vehicle’s emissions continue to meet its original ADR requirements—ADR 37/01 in this case.
This conversion does not need to meet the 2016 emissions requirements of ADR 79/03 that applied to the engine’s donor vehicle.
An RG240 test may be required to provide evidence that the modified vehicle continues to meet the emissions requirements of ADR 37/01, as determined by the nominated VASS signatory.
I have heard the term IM240, is that different to the RG240 test
In Victoria, RG240 is the term commonly used for the emissions test requested through the VASS certification process. Other states may use the term IM240. Test requirements, reporting formats and acceptance criteria can vary, so the relevant VASS signatory or interstate certifier should confirm what is required for the vehicle and jurisdiction.
How do I know if my vehicle has passed or failed the RG240 test
As an RG240 vehicle testing facility, HPF performs the test to the requirements of the Victorian Department of Transport. Your VASS Signatory will provide us with the relevant ADR requirements; we then present the results to the VASS Signatory to determine if the vehicle passes or fails. RG240 Testers do not have the authority to determine a pass or fail.
What happens if my vehicle fails the RG240 test
Where possible, we will work with you and your VASS signatory to address issues identified during testing. If mechanical repairs or tuning are required, we will discuss the available options before carrying out additional work. HPF can diagnose faults, perform approved repairs or adjustments and retest the vehicle on site. Timeframes and additional costs will be confirmed by your HPF representative.
What preparation should I do before bringing the car in for RG240 testing
We encourage you to download the pre-inspection checklist [HERE] to help make your booking as smooth and cost-effective as possible. The checklist covers the common issues we identify before testing.
Is the RG240 test accepted in other states
Acceptance outside Victoria is determined by the relevant state or territory authority and the certifier handling the vehicle. Before booking, confirm whether that jurisdiction will accept the proposed test facility, procedure and report format.
Do you offer on-site repairs or remapping if the vehicle fails
Yes. Unlike test-only facilities, HPF can provide tuning adjustments, mechanical repairs and general maintenance. Pricing and timeframes depend on the work required, and any additional work will be quoted separately before it proceeds.
Caveat: The information and examples in this page are for general guidance only. Vehicle modifications, applicable ADRs, emissions-control requirements and the need for RG240 or other testing must be assessed for each individual vehicle and conversion. Before commencing work or booking a test, consult your nominated VASS signatory and obtain confirmation of the specific evidence, equipment and testing required for certification.


