HPF STAGE 5 E85 | 560KW

FG FPV F6/FGX XR6 Sprint | HPF STAGE 5 E85 | 560KW

The HPF Stage 5 E85 upgrade for the Ford FG FPV F6, FGX XR6 Sprint starts with our trained technician fitting a stainless steel 4" dump pipe and 3.5" turbo back exhaust system. We then remove the standard turbo and replace it with a brand new Garrett Pro GTX 64 fitted with a 42mm flapper valve and a 10psi Actuator-capable of 500RWKW. We then fit Process West's 'No Cutting' Stage 3 Stepped Intercooler kit including CNC mandrel bent intercooler piping and silicone hoses to maintain reliability and keep intake temperatures under control for constant, dependable power..

The battery then gets relocated to the passenger's side of the engine bay to make way for the Process West 4" to 4" 'Race' cold air Intake for the ultimate air flow to your turbo. Fuel supply to the engine is then enhanced with a set of high performance E85 compliant fuel injectors, an external surge tank with the new Process West E85 compliant dual Walbro 460 fuel pump system, high flow pressure regulator and plug in wiring kit with a Pirotta flex fuel kit. Heavy duty valve springs and head studs are also a must so these are also replaced with quality Crow and ARP products. We then tune your vehicle's ECU on the dyno in real time utilizing the latest Ford ECU tuning software to maximize power, torque and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1 x Before dyno run
1 x PROGTX64 STG-4 turbo upgrade 64mm Billet Comp Wheel, PRO9 turbine wheel, .70 A/R Cover
1 x Process West stage 3 intercooler kit- including hot & cold side piping
1 x Process West fuel system (Dual pump, dual entry fuel rail, surge tank, reg, wiring)
1 x Pirotta flex fuel kit
1 x Process West 4" to 4" 'Race' cold air intake
1 x Process West battery relocation kit
1 x 3.5" Stainless steel turbo back exhaust (4" dump pipe)
6 x High performance fuel injectors
1 x ARP head stud kit
1x Crow Cams heavy duty valve springs
1 x Custom dyno tune (flex fuel)
1 x Labour to fit, tune and test
40L E85 fuel

Key Features

The big boy package! This one has the lot, the sound, the looks and the performance all to match E85 and you are talking Fighter Jet speeds....

Notes

• *Please note: Power figures are estimates only and actual figure's may vary.
• This package is specifically designed for E85 fuel.
• Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
• Modifications such as this package require the vehicle to be in excellent mechanical order.
• We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
• Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
• Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
• Images are for illustration purposes only
  

Enquire Here