HSV 6.2L HPF Stage 1 | 340KW

$2,095.00
Product Code: #HSV 6.2L HPF Stage 1 | 340KW
Install Time: 1 Day
Model Compatibility: HSV 6.2L
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
325kW
436hp
340kW
456hp
+15kW
+20hp
TORQUE
550Nm
406ft-lb
580Nm
428ft-lb
+30Nm
22ft-lb
POWER
STANDARD 325 KW
436 hp
DYNO CHIPTUNING 340 KW
456 hp
DIFFERENCE +15 KW
20 hp
TORQUE
550 Nm
406 ft-lb
580 Nm
428 ft-lb
+30 Nm
22 ft-lb

HSV 6.2L HPF Stage 1 | 340KW

The HPF LS3 Stage-1 upgrade starts with our trained technician fitting a Harrop ‘Over the Radiator’ Cold Air Induction system with a high flow, serviceable air filter element. We then custom tune your vehicle's ECU on the dyno utilizing the latest ECU tuning software to maximize power and torque and to optimize fuel efficiency. We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. This is all completed in a day and at the end of this upgrade you will be provided with a dyno graph detailing the power & torque increase of your vehicle. Flex Fuel (E85) is an option, talk to one of our Sales Representatives.

  • Cold Air Intake - The Harrop ‘Over the Radiator’ Air Induction (OTR) system features a large diameter free-flowing intake path to ensure maximum performance from your LS3 powered vehicle. It features a large surface area panel air filter mounted directly in front of the engines throttle body and is designed to draw straight in from the grille opening. This design assists in minimizing the restriction of air flow and eliminates the intake of hot air from inside the engine bay.
  • Dyno Tuning – By optimizing the engine tune parameters in the vehicles PCM to suit 98 octane fuel, we are able to increase both power and torque and maximise fuel economy. Late model naturally aspirated cars are generally tuned very well from the manufacturer so depending on the vehicle platform mechanical parts to improve the engines intake & exhaust flow may need to be added to really get good gains. Engines fitted with a turbocharger from factory are much easier to enhance as increasing boost pressure by tuning works extremely well.

Package Includes

1 x Harrop over the radiator cold air intake
1 x Harrop fascia & side infill panels
1 x ECU reprogram
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Key Features

Engine power enhancement is primarily about removing restrictions to the engine being able to breathe more air in and out. The Stage-1 addresses the primary restriction of the air intake. The OTR intake provides the engine clean, cold air in a straight path from the grille opening. This intake will provide enough air for at least 525kw (700hp).

Notes

  • Power figures are estimates only and actual figures may vary based on each specific vehicle.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Quoted power figures are approximate and calculated at the flywheel.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Final price may vary dependent on specific options chosen.
  • Some automatic transmission models may require a cooler kit at additional cost.
  • Images are for illustration purposes only.

Enquire Here