I30N Photo
Hyunai I30 CAI AFE
AFE I30
I30 I Wagner Intercooler
I30Ndump

STAGE 2 | 260KW

$7,190.00
Product Code: #HYUNDAI i30N 2.0L MY18-20 | STAGE 2 | 260KW
Install Time: 2 Days
Model Compatibility: Hyundai i30N | MY20118-20 | 2.0L
Note: This product can only be fitted at Horsepower Factory in Dandenong
Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
202kW
271hp
290kW
389hp
+88kW
+118hp
TORQUE
353Nm
260ft-lb
480Nm
354ft-lb
+127Nm
94ft-lb
POWER
STANDARD 202 KW
271 hp
DYNO CHIPTUNING 290 KW
389 hp
DIFFERENCE +88 KW
118 hp
TORQUE
353 Nm
260 ft-lb
480 Nm
354 ft-lb
+127 Nm
94 ft-lb

HYUNDAI i30N 2.0L MY18-20 | STAGE 2 | 260KW

The i30N Stage 2 upgrade starts with our trained technician fitting an AFE Takeda Stage 2 cold air intake and XForce down pipe to increase the engine's breathing capabilities. The intercooler is then replaced with a larger Wagner Tuning Competition front mounted intercooler, allowing cooler air temperatures to enter the engine. We then tune your vehicle's ECU on the dyno, maximizing all parameters including boost control, fuel, ignition timing and idle.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1 x Before dyno run
1 x AFE Takeda Momentum Cold air intake        
1 x X-force 4"-3" down pipe        
1 x X-force 3" centre exhaust section        
1 x Wagner Tuning Competition intercooler kit        
1 x Custom ECU Remap
1 x Labour to fit, tune and test

Key Features

Good power gains, very noticeable power and torque increase across the board, with zero down sides.

Notes

We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.

  • *Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here