STAGE 4 | 220KW

$11,775.00
Product Code: #HILUX N80 2.8L 2015 to 2020 | STAGE 4 | 220KW
Install Time: 3-4 Days
Model Compatibility: Hilux N80 2.8L 2015 to 2020
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
130kW
174hp
220kW
295hp
+90kW
+121hp
TORQUE
450Nm
332ft-lb
700Nm
516ft-lb
+250Nm
184ft-lb
POWER
STANDARD 130 KW
174 hp
DYNO CHIPTUNING 220 KW
295 hp
DIFFERENCE +90 KW
121 hp
TORQUE
450 Nm
332 ft-lb
700 Nm
516 ft-lb
+250 Nm
184 ft-lb

HILUX N80 2.8L 2015 to 2020 | STAGE 4 | 220KW

The package starts with our trained technician fitting a G-Turbo KD-G250 turbocharger as the power and torque of the 2.8L engine really starts to fall over after 2900rpm.

We then fit a a Process West front mount intercooler as the standard intercooler is logically positioned at the front of the vehicle but the sizing of the intercooler and the unreliability of the intercooler hoses are not ideally suited for sustained hard driving or towing, as such we recommend a new heavy duty, larger capacity intercooler and piping kit. The much larger intercooler is more able to control the heat generated when towing or off-roading and the silicone intercooler hoses are significantly stronger than the factory rubber hoses thus maintaining the engine's power and reliability in all situations. The intercooler is a worthy consideration with the turbocharger upgrade as we have seen a 40 degree drop in intake temperatures after installation.

We then fit new +30% fuel injector caps to increase fuel injector capacity along with a turbo back exhaust system to improve the engine's breathing and complete the mechanical upgrades by fitting a Process West SEPR8R air oil separator to capture oil mist entering your engine's inlet manifold which can build up in your engine's intake.

We complete the package by custom tuning your vehicle's ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

Package Includes

1x HPF custom dyno tune
1x Process West Sepr8r catch can
1x Gturbo KD-G250 turbocharger (change over)
1x Process West front mounted intercooler
1x Pacemaker DPF back exhaust system
4x +30% Fuel Injector caps
1 x Labour to fit, tune and test

Notes

  • Does not suit 2021 models onwards. Contact us for details
  • This package can only be fitted at Horsepower Factory
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.
  • *Intercooler fitment charge may vary depending on vehicle configuration i.e if it has a bull bar and winch,driving lights etc.
  • Manual vehicles will require a HD clutch upgrade.

Enquire Here