HPF STAGE 3 | 550KW

From $24,595.00
Product Code: #FGX / FPV S/C 5.0L | HPF Stage 3
Install Time: 3 days
Model Compatibility: FGX - FPV GT, GS Supercharged V8
Note: This product can only be fitted at Horsepower Factory in Dandenong

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
315kW
422hp
550kW
738hp
+235kW
+315hp
TORQUE
545Nm
402ft-lb
800Nm
590ft-lb
+255Nm
188ft-lb
POWER
STANDARD 315 KW
422 hp
DYNO CHIPTUNING 550 KW
738 hp
DIFFERENCE +235 KW
315 hp
TORQUE
545 Nm
402 ft-lb
800 Nm
590 ft-lb
+255 Nm
188 ft-lb

FGX / FPV S/C 5.0L | HPF STAGE 3 | 550KW

TThe FGX/FPV GS, GT, and GT-P Supercharged Boss 5.0L Stage 3 upgrade delivers unparalleled engine performance and efficiency through premium components and expert tuning. The upgrade begins with installing a high-flow K&N air filter to optimize engine breathing and airflow. A KPM 1000hp fuel pump module, paired with a Herrod high-flow fuel pressure regulator and eight XS1000 premium high-flow fuel injectors, ensures precise and robust fuel delivery for extreme performance demands. A KPM 70mm top pulley boost upgrade and a Herrod high-boost overdrive harmonic balancer maximize supercharger output, while a huge Herrod water-to-air intercooler kit maintains optimal charge air temperatures for consistent performance. A KPM dual throttle and intake elbow further enhances intake efficiency. For both Ute and Sedan models, a Manta 3” full exhaust system, including headers and high-flow catalytic converters, is installed to maximize exhaust flow and minimize back pressure, significantly boosting engine efficiency.

After component installation, our technicians perform a custom ECU flash tune using advanced HP Tuners software on a dynamometer, optimizing the engine for maximum power, torque, and fuel efficiency. The upgrade concludes with thorough road testing to ensure peak response and drivability. A dyno graph is provided, detailing the dramatic power and torque gains achieved.

This Stage 3 upgrade is modular, allowing future enhancements without redundant costs. HPF guarantees maximum safe performance, reliability, and drivability.

Package Includes

1 x High flow air filter         
1 x KPM 1000hp Fuel Pump Module        
1 x Herrod High flow fuel pressure regulator        
1 x Manta 3" Full exhaust system         
1 x KPM 70mm Top pulley Boost upgrade        
8 x XS1000 Premium High flow fuel injectors        
1 x Herrod Water to Air Intercooler Kit        
1 x Herrod high boost overdrive harmonic ballancer        
1 x KPM Dual Throttle and Intake Elbow        
1 x Custom ECU dyno tune 
1 x Before and after dyno graph
1 x Labour to fit, tune and test 

Key Features

"With an extra 150+kw at the treads this package will convert your ride into a time machine...

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here